If you live in an area that experiences very cold weather, you have to make sure that you always have a well-functioning heating unit. You want to avoid a situation where the unit develops a fault in the middle of winter as much as possible. The best way to avoid such mishaps is to ensure that you schedule furnace maintenance on a regular basis. Furnaces go through wear and tear, and even breakdown sometimes. However, if the system is inspected and serviced frequently, you can avoid problems that can arise prematurely.
Although you might feel the need to do a DIY project when it comes to your furnace or even call an inexperienced friend to assist, that is definitely not the way to go when dealing with furnace issues. Find out why it is so important to contact a professional furnace repair company to solve your furnace issues. Not only is it wiser to do so, but it is also a good way to save money over time.
Signs That You Need To Contact A Professional Furnace Service Company
The discussion below focuses on the important signs that every homeowner should not miss, and which need the attention of an expert.
An Overheating Furnace
Overheating is usually an indication that you have a blocked filter. Over time, your furnace is going to gather things such as dirt, dust, and many other particulates. It can get to a point where the filter has too many particulates that it hinders the proper flow of air. This causes the heating system to work much harder just to produce the correct temperature.
Overheating is also known to damage a part of the heating unit known as the heat exchanger. It can be quite expensive to fix the heat exchanger. In order to avoid overheating, the solution is to make sure that the air filters are cleaned or replaced on a regular basis.
A Faulty Thermostat
The function of a thermostat is to show the temperature being produced by the heating system. A common indicator that your heating unit is not functioning as it should is a malfunctioning thermostat. If you have a heating problem, check the settings on the thermostat. It must be switched on and then set to “HEAT”. Also, make sure that the fan is at the “AUTO” setting.
If you notice that the thermostat is showing incorrect temperatures, look to see if it has any dust or dirt. Poorly maintained older thermostats sometimes give you incorrect temperatures. After, switching off the thermostat, take a clean and dry brush and clean off the dirt and dust. If there are areas that are corroded, simply make use of a contact cleaner to get rid of the dust; one that is made especially for electronics. Also make certain that the thermostat is placed far away from all heat sources, like stoves and direct sunlight.
HVAC Ductwork Damage
Your furnace could also not be functioning properly due to damaged ductwork. When the heating unit produces heat, that warm air is dispersed via the ducts in the house. However, if there is a leak caused by a gap, crack or some other damage in the ductwork, warm air will escape. This will lead to the uneven distribution of air throughout your home. If the ductwork is severely damaged, the furnace can actually stop working entirely.
Why A Faulty Gas-Fired Furnace Is So Dangerous?
One of the downsides of a gas-fired furnace is that it can develop a gas leak, and a gas leak can be very dangerous. The gas which leaks from the unit can be toxic to the occupants of the house, including the animals. Serious health problems can result if you are exposed to gases like methane and carbon dioxide. If you are exposed to some of them for too long, it might actually lead to death.
Apart from being exposed to harmful substances, gas leaks can also cause explosions, fires, and electric shock. That is why you should never attempt to fix any issue with your furnace yourself. This is the job of a well-trained HVAC expert who will conduct the necessary inspection and repair.
What You Can Expect From A Professional HVAC Contractor
There are several benefits associated with hiring a licensed expert to help you if you have a faulty furnace. Some of them are discussed below.
Financial Savings
A professional HVAC contractor knows how to correctly examine your unit and spot any problems. He or she also knows how to correctly repair the unit if it has any issues, and how to perform maintenance procedures. They also have knowledge of every type of heating system, meaning that they will service or repair your system based on set guidelines for that particular contraption. If you choose to fix any problems yourself, or you offer the job to an inexperienced individual, chances are that you will make the situation worse and end up paying more to fix the problem.
Safer Home
A professional technician will make sure that the repair process is carried out correctly, ensuring your safety. Any mistake in the repair process could result in the safety of the occupants of the house being compromised. An error could lead to things such as an explosion, fire, or the release of harmful gases. If you notice that your heating system has an issue, call a professional technician to assist you immediately.
Reduced Work Time
Because certified technicians follow set guidelines when identifying and fixing issues, it will not take them too much time to resolve the problem. If you opt for someone who does not have the requisite expertise, chances are that the process will take longer than it should.
Required Skills
If you choose a professional technician, you will be going for someone who has years of experience in this field. As such, you can be assured that the job they do will be done properly. It is important not to forget that a furnace is a specialized contraption that needs to be serviced or repaired in a specific manner.
Better Warranty
The warranty which comes with every HVAC unit requires that only a licensed HVAC technician tune-up your furnace. So, if you want to ensure the validity of your heating system, make sure that a professional contractor handles the system. The warranty can be voided if you allow someone else, other than a certified HVAC contractor to repair the furnace. If you choose a reliable HVAC company, the company will make sure that the services they offer you are backed by a guarantee.
Conclusion
If you have a malfunctioning furnace, you are already at an inconvenience. It therefore does not benefit you to let someone who is not experienced take a chance and try to fix the problem. Simply call your local HVAC contractor instead and save money and time.
Contact Point Bay Fuel For All Of Your HVAC Needs
Point Bay Fuel offers reliable heating and cooling services in Monmouth and Ocean Counties, New Jersey. We only hire top certified technicians who can provide you with first-rate HVAC services, repairs, installations, and replacements. All our technicians have the knowledge and skill to service your HVAC system properly.
Point Bay Fuel guarantees the cheapest heating and cooling service in the area. We offer maintenance services that can enhance your comfort and energy efficiency while saving you money. We can assist you to get an HVAC repair or replacement unit based on your specific budget. Our services are backed by a guarantee to make sure that our clients are satisfied with our work. To schedule an appointment, contact Point Bay Fuel today. We also offer free, in-home estimations.
Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!
The post Why You Should Call A Professional For Your Furnace Repair appeared first on Point Bay Fuel.
To prepare for the removal of animal carcass, make sure to put on protective gloves first. Dead bodies may carry disease-causing microorganisms that could be transmitted by direct contact. Protect your hands by putting on protective plastic or rubber gloves.
Electrostatic filters are similar to magnets. These filters attract contaminants due to opposite charges. When polluted air flows through the filter, the particles are captured so that air that is distributed through the system is cleaner. Since these filters continuously collect particulates, they become oversaturated after some time, which means they will no longer perform efficiently. When this happens, indoor air quality is severely reduced. If you happen to be using a disposable filter, check to see if it is clogged and replace it. If your system uses a washable or reusable filter, take out the media, clean it, and re-install it each time it becomes clogged. 
Reusable HVAC filters do not require a replacement until after about five years or so. One reusable filter can take the place of 20-60 disposable filters which often have a lifespan of only 1-3 months. This helps reduce the amount of trash disposed of in landfills.
Washable filters will only require replacement after several years, so there is no need to order a replacement or head off to the store to buy one. With a washable filter, simply remove the unit, clean and dry it, then re-install it. 
If you have a budget to stick to, washable filters, particularly electrostatic ones, may not be an option. However, consider carefully the long-term savings washable filters can offer. 
After washing a reusable filter, it is important that you let it dry. If the filter is not completely dry when you reinstall it, the moisture left in the unit could attract mold, which in turn will cause poor IAQ.
There are other high-performing heating and cooling filter types that you can use instead of electrostatic ones. Two of the better options are electronic filters and high-efficiency media filters. Their method of removing particulates and debris from the air differ but they both provide excellent air pollution control. They have a high-efficiency performance in removing most of the contaminants found in indoor air. Using these filter options, you can actively reduce risks associated with indoor air pollution such as allergies, asthma, and other respiratory issues. These options are also reasonably priced and have a long lifespan.