New Efficient Oil Heating Systems Increase Comfort And Decrease Fuel Use

Advances in home heating technologies have had a major impact on households throughout the nation. This is an excellent time to upgrade your home heating equipment, as new oil-fired heating systems are far outperforming those from several years ago. Manufacturers are increasingly focusing on efficiency, and their efforts over the past several decades have produced some really impressive results. People are able to enjoy greatly increased indoor comfort on even the very coldest days of winter. They can also limit their use of fuel oil, given that the most efficient oil heating system is able to provide more warmth with less energy. Keep reading to find out how the latest changes in these technologies are capable of benefiting you.

Explore Our Heating System Services Call To Schedule An Appointment

The Higher Efficiency of Brand New Oilheat Systems

If you are using an older oil heat system in your home, now is a good time to consider investing in a new one. This is a more than worthwhile upgrade, given that heating systems are able to provide some amazing returns. They have efficiency ratings that reach as high as 98 percent so that there’s far less energy waste. Consumption is also a lot lower, with energy savings rising as high as 48 percent. Brand new boilers additionally have energy-saving controls that can limit fuel usage by up to 10 percent and produce greater overall heat. New oil furnaces additionally have variable-speed motors that require 80 percent less electricity than fixed-speed motors do. Even heating oil has seen a few enhancements with mixtures that make them cleaner-burning and more efficient.

Call Today: (732) 349-5059

Modern Innovations That Are Driving Improvements in Oilheat Efficiency

 

1. New Heaters Have Lightweight Heat Exchangers

When searching for a replacement oil furnace, start by checking the list of furnace features to find out whether the equipment has cutting-edge innovations that drive its efficiency levels higher. One such innovation is a lightweight heat exchanger. This component moves heat from the combustion fuel into the indoor air. With a lightweight construction, it can offer better heat transfer than a heavier heat exchanger can.

2. Electric Ignition Systems

Older furnaces often have standing pilot lights. By modern standards, these are obsolete. Electric ignitions are known to be a far better option, given that they require less energy. These ignition systems only use power when needed.

Learn More About Our Home Heating Services Call To Make An Appointment

3. Combustion Chambers That Are Sealed

Older furnaces have atmospheric combustion chambers. Given that these are open to the entire home, they gradually lose heat. Comparatively, the combustion chambers in new furnaces are sealed, and they’re able to get air from PVC pipes which allow for increased safety and improved heat retention.

4. Two-Stage Oilheat Furnaces

There are just two states for old furnace burners: OFF and ON. These units work at full capacity whenever they’re on. However, new furnace burners have various states so that they’re able to work at lower capacities to save energy. This additionally allows for more even heat distribution throughout the living environment.

5. Variable-Speed Fan Designs

Finally, newer furnaces have spans that can function at variable speeds. This proves incredibly handy, given that you don’t always need these components working at full speed. Lowering fan speed settings is a great way to limit energy consumption

 

The Amazing Benefits of High-Efficiency Oilheat Furnace Improvements

1. These Models Last Longer

You can expect a new heating oil system to outlast most older models. There are a number of innovative features and functions that allow these units to cycle off and on as needed for decreased energy use. Apart from giving efficiency a nice boost, this also allows heating systems to rest. General wear is reduced, and lifespans are extended. Newer heating systems can also extract moisture from the indoor air and deal with chemical accumulations for even longer service life. This also provides the added bonus of a healthier living environment.

2. Your Home Utility Bills Will Go Down

Many homeowners wait to buy new furnaces due to their upfront costs. Instead, they hold onto their existing heating equipment in an effort to save cash. However, inefficient heating systems result in higher energy bills. Comparatively, replacing an outdated unit can result in less spending from month to month. Older heating systems have AFUE ratings of about 65 percent, while new furnace models can have AFUE ratings as high as 98 percent.

3. Lesser Impact on the Natural Environment

The decrease in fuel use is downright impressive. Many people wind up using one-third the amount of fuel that they used before because their new home heating systems are able to produce sufficient heat with far smaller amounts of energy. However, household budgets aren’t the only thing to benefit from this important upgrade. The natural environment benefits too. High-efficiency furnaces reduce greenhouse gases and conserve limited resources. This is definitely an improvement to make if you’re looking for ways to make your home more environmentally friendly. In some areas, homeowners are even able to enjoy tax credits and other incentives when choosing efficient HVAC equipment.

Call To Make An Appointment

4. HVAC Maintenance Is Easier

Older heating systems can start failing or experiencing regular problems after just one decade of service. Homeowners have to be increasingly mindful of ongoing maintenance in order to keep these systems functioning as they should. They may even pay for costly repair services with increasing frequency. If you want your furnace maintenance to be virtually stress-free, you should upgrade your current heating equipment with a new and more efficient heating system.

5. Heat Distribution Is Improved

Many large homes deal with unevenly distributed heat. Some rooms wind up being hot while others remain cold – which can leave some building residents uncomfortable and prone to complaining. New oil heat systems have the ability to effectively distribute heat so that everyone in the household can sleep comfortably even when the outside temperatures have plummeted. They can enjoy manageable temperatures and consistent airflow.

6. Home Values Increase

Investing in a modern heating system for your home will instantly boost the value of your real estate. Property buyers appreciate the benefits that efficient heating systems provide, and thus, they’re often willing to pay a bit more for homes that have them.

Call To Schedule A Consultation

 

Conclusion

There are many things that homeowners can do to boost the efficiency of their home heating systems, such as scheduling yearly HVAC tune-ups and having smart thermostats installed. However, having a modern oil-fired heating system installed is the absolute best way to maximize your energy savings. You can enjoy all of the above-mentioned benefits and more by making this upgrade today. Speak with a local HVAC Company now to get help finding the right heating equipment for your home and to learn more about your financing options.

Call To Schedule A Free Consultation Explore Our Case Studies

Call Point Bay Fuel For All Of Your HVAC Requirements

Point Bay Fuel provides top-quality heating and cooling services in Ocean and Monmouth County, New Jersey. Our company has highly trained and the best professionally certified technicians for all your HVAC service needs, including boiler tune-ups, air conditioner repairs, furnace installations, and more. All our techs are knowledgeable, skilled and experienced in working on any HVAC system correctly.

Rest assured, we have the most competitive HVAC service prices in the area. Our maintenance services can enhance comfort and energy efficiency while reducing your energy bills. When you need to replace or repair your HVAC system, we can recommend the best solutions that fit your home and budget. All our work comes with a guarantee. Book a service appointment by calling Point Bay Fuel today. We offer in-home estimates.

Call Now: (732) 349-5059 Read Our Testimonials

Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!

The post New Efficient Oil Heating Systems Increase Comfort And Decrease Fuel Use appeared first on Point Bay Fuel.

Do Leaky Windows Affect How My Home Is Heated?

Heating systems strain against the chill of the winter wind to keep your homes warm and comfortable. But air leakage can interfere with the dynamics of heating a home in a bad way, and this can cause your heating equipment to overwork, leading to lower efficiency, increased energy consumption, and unnecessary HVAC repairs.

Air leakage is a very common problem but not one that is immediately evident. Thus, it rarely gets the attention it should. Hot air from inside the home can escape from in between the cracks and gaps of the windows. Unfortunately, this counteracts the dynamic of your home’s thermal pocket, creating hot/cold spots. In the following article, we take a closer look at this issue and explain why you should take action immediately if you feel this is happening in your home.

Explore Our Heating System Services Call To Schedule An Appointment

Do Leaky Windows Affect How My Home Is Heated?

Read on to learn more about the severe impact that leaky windows have on the heating of your home. Remember that these concepts apply to any flaws in the integrity of your home’s thermal pocket, including doors, fireplaces, crawlspaces, electrical outlets, and anywhere else.

Learn More About Our Home Heating Services Call To Make An Appointment

Why Leaky Windows Are An Problem

In accordance with the second law of thermodynamics, heat always travels from regions of high temperatures to regions of low temperatures. This is why the ice melts on the sidewalk, and the sidewalk does not freeze under the ice.

By the same measure, if your windows are open, or slightly open, or even just a crack open, heat will be escaping from your home’s thermal pocket and causing your heating systems to work harder and unnecessarily use more energy. This means that leaky windows can make it harder to control your interior temperatures. Furthermore, there are other complications that can arise from this issue.

The Impact Of Air Leaks On Energy Bills

As the heat escapes your home, there will be a noticeable drop in temperature. This will cause the home’s heating to fire back on as a way to increase the temperature in the home to your desired levels. The heat will escape much faster than it ought to, and the process will repeat itself. This means the heating will be turned on far more often than necessary and result in increased energy consumption. Failing to act quickly can result in a considerable loss of energy and finances.

But the financial implications of a leaky window do not end there. A furnace is a finely tuned implement measured to heat your home’s thermal pocket for an estimated amount of service life. If it is forced to work harder, it will suffer a great reduction in its service life as a result of wear and tear. Before its final and early retirement, it will likely suffer premature breakdowns and require replacements. All these details can add up to result in a considerable financial strain on your budget.

Call Today: (732) 349-5059

How Do I Test for Air Leakage?

The next logical question concerns detecting such a budget-flattening situation brewing in your home. If you have an air leak in your home, you will certainly want to know about it as soon as you possibly can. Here are some tips on how to perform a fairly thorough inspection of your home’s windows to determine the presence of a leak.

• Visual Inspection: Begin with a visual inspection; you can usually tell what is well-sealed and when these seals are cracked and in poor condition. While you are walking about the house, take a moment to check the seals and frames of all doors, attic hatches, and baseboards. This inspection will alert you to the conditions of these important components of your home’s thermal pocket, so make some notes of everything you find.
• Building Pressurization Test: This is a test that will try to detect the movement of air through the house. But it will only work if everything is still. Shut off the heating and vents and walk around the house with an incense stick. If the smoke can pass from the inside to the outside, you can be pretty sure there is a leak. Run the stick of incense around the edges of the windows to detect any currents of air escaping the home.
• Blower Door Test: This is a slightly more advanced method of finding the leak in the windows and is typically only carried out by professionals — it also delivers more precise results. HVAC technicians will hook up a blower to one of the vents in the home and push air into the home. This will create negative pressure and force air out of the home through the gaps and cracks. This will allow them to identify the leaks in your home. They will also be able to measure the amount of air that is escaping your home.

Get Started - Call Point Bay Fuel Today Explore Our Case Studies

Tips For Sealing Air Leaks

There are some measures the average homeowner can take to counter this issue. Slim gaps can be filled with caulking, and larger gaps can be addressed with foam sealant. But if the air leakage is extensive, it may require more advanced solutions and specialized insulation work. A professional service will deliver superior results from the use of specific tools and specialized training.

Common Areas That Benefit From Air Sealing

 

• Doors & Windows – Over time, doors and window seals will deteriorate with exposure to the elements. Sometimes the installation technicians will overlook the caulking in some sections of the window. This can lead to cool drafts in the winter. It is imperative to your energy expenses that this is sealed instantly.
• Switch Plates & Electrical Outlets – It is often apparent that these features of the electrical system are sitting flush with the walls. However, the errors can be hidden but have considerable consequences. This could be due to poor installation work or uneven wall surfaces. Gaskets can help you to seal off this perimeter completely.
• Plumbing & Wiring – There may be points where the piping in the home passes through walls and insulation. If this is not sealed properly, the leaks in your home can cost you a bundle. Make sure these spots are addressed with a non-hazardous material.
• Roof & Attic – Thermal expansion can lead to gaps created in the roof of your home. This can lead to leaks when it rains. But it can also lead to seams and corners becoming disjointed and allowing interior heat to escape.
• HVAC Air Ducts – Ducts are the conduits through which air moves about the home. If these were to develop leaks, there would be substantial temperature differences between the rooms. A professional service will be able to hunt down these leaks and address them decisively.

Call Point Bay Fuel To Schedule Heating System Service

 

Call Point Bay Fuel For All Of Your HVAC Requirements

Point Bay Fuel offers superior heating and cooling services in Ocean and Monmouth County, New Jersey.

Our certified technicians can provide you with excellent HVAC services, including heating and cooling tune-ups, repairs, installations, and replacements. Each technician has outstanding knowledge and experience to serve your HVAC system needs correctly the first time around.

Point Bay Fuel guarantees to provide the most competitive heating and cooling service costs in the area. Our maintenance services ensure to improve your comfort, increase your system’s energy efficiency, and reduce your home’s heating and cooling costs.

Need your system repaired or replaced? We’ll recommend the best solution that works well within your budget. The best part is that all our work is backed with a guarantee to ensure your satisfaction. To schedule a service appointment, give us a call today!

Call Now: (732) 349-5059 Read Our Testimonials

Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!

The post Do Leaky Windows Affect How My Home Is Heated? appeared first on Point Bay Fuel.

8 Reasons Your Heat Pump Can Cause Your Breaker To Trip

When an appliance trips your home’s circuit breaker, it’s a sure sign that something is wrong. This kind of issue can crop up from time to time, but what if it’s your heat pump causing the problem? Without a working heat pump, the temperature of your home may not be as comfortable as you’d like. That’s why if your breaker trips as soon as you flip the switch of your heating system, you need to call a professional HVAC contractor who can identify the issue and perform a heat pump repair. In this article, we discuss why a heat pump keeps tripping breaker.

Explore Our Heating & Cooling System Services Call To Schedule An Appointment

When Your Heat Pump Constantly Trips Your Breaker

One main reason a heat pump unit trips a circuit breaker is that it draws too much power to operate properly. Several things can cause this:

1. Your Heat Pump Air Filter is Dirty

A filthy air filter can obstruct proper airflow. As a result, your home’s air quality decreases. In turn, your heat pump has to work harder and longer to circulate cooled and heated air throughout your home. This type of inefficiency means the heat pump draws significantly more amps, which causes the circuit breaker to trip. If your indoor vents are closed or blocked, it can also hinder airflow and cause the breaker to trip.

Call Today: (732) 349-5059

2. There are Heat Pump Wiring Problems

Your circuit breaker can also trip if your heat pump has wiring issues. Typically, there are three main reasons for electrical problems:

• A Short Circuit In Your Motor Fan: This happens when the electrical current doesn’t flow through its normal path. Shorts usually occur when the insulation around the wires deteriorates. The wires then receive too much power, which leads to the breaker tripping.
• Wiring That’s Worn-out Or Loose: When wires are loose or damaged in some way, they can draw too much power or heat and trip the circuit breaker.
• The Breaker Is Faulty: Normal wear and tear can cause an old circuit breaker to malfunction, which can result in constant tripping. If this is the case, you’ll need to hire a professional to inspect the fan heat pump and wiring and then either install new wires or repair degraded ones. A skilled HVAC technician can diagnose and fix wiring problems or provide a referral to an electrician if needed.

3. The Outdoor Fan Needs Fixing

Your heat pump’s outdoor fan can fail and cause your breaker to trip. The fan blows air over the refrigerant coils. If there’s an obstruction, the fan motor can lock up and malfunction. The result is that it may draw more power, causing the circuit breaker to trip. Therefore, it’s crucial to have it professionally maintained and cleaned regularly.

Explore Our HVAC Services Call To Make An Appointment

4. The Heat Pump Compressor is Malfunctioning

Think of the compressor at the heart of the heat pump. It’s an essential part of the heating and cooling process as its job is to pump the refrigerant throughout the system. During normal operation, it requires a lot of electric power to operate. However, certain issues can cause the compressor to draw too much power and trip the breaker. Multiple things can lead to compressor problems, including:

• Heat Pump Compressor That’s Hard To Start: Older compressors usually don’t fire up as easily as newer ones. This can lead to circuit breaker trips since a hard-starting compressor draws too much current from the circuit when starting.
• Compressor That’s Grounded: This means the wiring is touching the metal casing, effectively creating a short. The result is a tripped breaker.
• Fault With The Capacitor: The capacitor is a component that stores electrical energy and helps the compressor to start. If the device malfunctions, the compressor will have difficulty starting. If you find that your circuit breaker trips every time the outdoor unit starts up, a faulty capacitor is likely the problem.

Preventing these issues is as simple as routine maintenance by a professional. Besides being able to spot failing parts earlier, a certified HVAC technician can fix certain problems, such as compressor malfunctions. However, some problems are slightly more difficult to resolve. For example, since compressors are sealed tightly, technicians have a hard time repairing them. In cases where it’s impossible to fix the compressor, replacement is the only solution. Although a new compressor is expensive, it may still fall under your manufacturer’s warranty if the warranty is still valid. An HVAC technician can help you determine whether you need a replacement compressor and if it’s covered by your warranty.

5. The Heat Pump Condenser Coil is Dirty

The heat pump’s condenser is another part that will stop working efficiently if it becomes too dirty. The condenser coil gathers and releases heat, which either cools or heats your home. A dirty condenser coil means your heat pump must work extra hard to do its job properly and generate the same amount of heating or cooling. Regularly checking your unit can help you avoid this problem.

Learn More About Our Heat Pump Services Click Here To Call For An Appointment

6. Your Heat Pump is Overworked

Clogged air filters, dirty outside units, and closed or blocked vents are all culprits of a heat pump that’s malfunctioning because it’s overworked. These issues are preventable, making it all the more important to have a licensed HVAC technician diagnose and repair issues during regular maintenance visits.

7. Your Heat Pump Has a Short Circuit

A short circuit will trip your breaker the moment you flip the switch of your unit. Short circuits are incredibly dangerous, which is why you should immediately call a licensed HVAC technician. Besides causing serious damage, short circuits can lead to a fire. In fact, a report by The National Fire Protect Agency reveals that fire departments across the United States were called to handle around 44,880 fires caused by electrical malfunctions each year between 2012 and 2016. Cooking and heating equipment were responsible for about 10% of those fires.

Explore Our Heating & Air Conditioning Services Get Started - Call To Schedule An Appointment

8. Your Heat Pump is Low on Refrigerant

Heat pumps use a liquid substance called “refrigerant” to cool and heat your home. When refrigerant levels are too low, which is generally caused by a leak, the heat pump cannot effectively warm or cool an area. To compensate, the heat pump works harder to reach the temperature you’ve set on your thermostat. Due to the additional stress on the system, components tend to draw more power and trip the breaker.

Again, to avoid an issue like low refrigerant levels, it’s crucial to establish a regular maintenance schedule for your heating system. Furthermore, you should contact an HVAC professional as soon as you notice your system’s refrigerant is leaking. A technician will use the right testing method to find the leak’s source and fix it. On the upside, when your circuit breaker trips because of heat pump issues, you know your breaker is functioning correctly since its job is to prevent an overload of electrical current. When a circuit breaker isn’t working properly, you run the risk of an electrical fire, which can result in bodily harm, fatalities, and property loss.

 

Conclusion

If your heat pump repeatedly trips your circuit breaker, it’s likely due to the air filter being dirty, wiring problems, your outdoor fan having issues, a malfunctioning compressor, a filthy condenser coil, your heat pump being overworked, short circuits, or a refrigerant leak. All of these causes are preventable as long as you have your system regularly maintained and cleaned by a professional. Hiring a reputable HVAC technician with the proper credentials to sort out any issues not only ensures your safety but also ensures your home is a comfortable, temperature-controlled environment.

Call Point Bay Fuel To Schedule An Appointment Explore Our Case Studies

Contact Point Bay Fuel For Your HVAC Needs

Point Bay Fuel offers top-notch heating and cooling services in Monmouth and Ocean County, New Jersey. We only hire the best-certified HVAC technicians who can tend to your every HVAC repair, tune-up, installation, and replacement need. Since our techs are properly trained and certified, they have the knowledge and experience required to correctly service your HVAC system.

At Point Bay Fuel, we guarantee you’ll get the most competitive HVAC service prices in the area. With our maintenance services, you’ll increase your home’s energy efficiency, reduce your cooling and heating costs, and improve your comfort. If your system requires HVAC repairs or a replacement system, we offer recommendations for the most suitable solutions for your home while keeping your budget in mind. Our work is backed by a satisfaction guarantee, so schedule your service appointment by calling Point Bay Fuel today. We provide free, in-home quotes.

Call Now: (732) 349-5059 Read Our Testimonials

Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!

The post 8 Reasons Your Heat Pump Can Cause Your Breaker To Trip appeared first on Point Bay Fuel.

My Furnace Turns On But No Heat – Why?

Your home offers warmth when the temperatures outside plunge. All you have to do is turn on your furnace to heat your indoor air. It is a reliable system that typically works well, but there may be times that it encounters an issue, so it doesn’t operate as it should. For example, what if the furnace turns on but no heat? This is a common problem, and many homeowners become frustrated, especially if the indoor temperature plummets fast. Being level-headed will let you assess each of the likely causes.

Explore Our Heating System Services Call To Schedule An Appointment

Why Am I Not Getting Any Heat When My Furnace Is On?

The simple fact that your furnace still switches on is beneficial. It signals that the power supply is in good working condition. However, something else within the system may keep it from working properly. The problem may be a simple oversight that needs some quick tweaking for the unit to get back to proper working order. This is typically the case, so you don’t have to panic. If the issue is more complex, you can leave it in the capable hands of a licensed HVAC contractor.

Read on to learn the most common causes of a furnace that is not producing heat even when turned on. Some of these are incorrect thermostat settings, airflow problems, furnace ignition problems, and insufficient fuel.

This article includes what can go wrong in these areas. It also contains basic furnace troubleshooting so the unit can be set straight. Every homeowner can do these simple measures. With luck, your furnace will return to operation so you can put its issues behind you. However, if the furnace remains unresponsive even after performing a furnace inspection, call an HVAC professional for help. Learn from this experience as well. This way, you can keep the problem from recurring.

Problems at the Thermostat

Furnaces are built to operate as instructed. If your intention and instruction to your furnace differ, you will receive unexpected results. The thermostat is your heating system’s control center, so you need to be sure that you input the correct information. For example, you may have wanted your heating unit to produce warm air but haven’t set the thermostat yet to trigger heat production. In this case, your furnace isn’t really malfunctioning as you only need to change the thermostat to match your heating goals. The thermostat may be set to COOL, so you must change it to HEAT.

Someone in your house may have adjusted it while you were away and forgot to turn it back. Never assume that the settings in your thermostat are correct. Take your time to check it first.
The fan settings should be checked as well. Many homeowners think that a moving fan means the furnace produces and distributes heat. However, this doesn’t always happen. A fan set to ON means it will run all the time, even when the furnace isn’t in a heating cycle. It is better to set the fan to AUTO, so it will only run during heating cycles, ensuring that only heated air is forced through the vents. You can also opt to set your thermostat higher by around five to ten degrees. This will help you feel a noticeable difference. Call a professional HVAC technician if cold air from your furnace persists even after doing these steps.

Call Today: (732) 349-5059

Problems With Furnace Airflow

Air should be able to travel freely throughout your furnace so that the unit operates properly. Airflow issues can result in the heat being unable to travel from the system to each room. Heat may not be coming out of your furnace due to an obstruction stopping the flow of air. Some of the common causes of this problem are:

The Furnace Air Filter Is Dirty

Air filters capture airborne debris, such as dirt, pollen, dust, and pet dander. They are crucial components as they keep the ductwork and furnace interior from becoming dirty. However, they tend to accumulate gunk over time. As a result, the filter’s surface becomes covered in a thick layer of dirt that blocks the air from freely passing through them.

The best approach homeowners can take is to perform monthly air filter checks. This way, they can see when they need to replace it. Many can follow the manufacturer’s replacement schedule but keep in mind that several factors affect when is the best time to replace their furnace air filters. Some homes may need a more frequent filter change than others, especially if the area they live in tends to have a lot of dust or if they have a lot of pets.

Learn More About Our Home Heating Services Call To Make An Appointment

Fallen Debris & Other Obstructions

Items may have fallen into the heater vents. If so, they need to be removed. Take off the vent covers and use a flashlight to see. Remove any objects you can reach immediately. Use a pair of gloves to be safe if you are unsure what you are retrieving. You can try using a long wire or stick for any items that are hard to reach.

Some Of The HVAC Vents Are Closed

The problem may be as simple as a few closed vents. Walk around your home to ensure that all louvers are open. Make adjustments when needed. The louvers may have gotten stuck, so remove the vent covers and clean them from time to time. Jammed covers may need to be replaced.

Moreover, ensure that the registers or vents are not blocked. Someone may have moved furniture, causing a block to a vent. Remove these blockages to ensure good airflow again.

Call Point Bay Fuel To Schedule Heating System Service

Furnace Ignition & Fuel Problems

Furnaces that switch on but do not generate heat may be low in fuel. A furnace that doesn’t have an energy source will not be able to accomplish anything. If the furnace is gas-powered, check that the gas valve is open and verify that there is no interruption with your gas company. If the line service was interrupted, determine when it will be restored.

On the other hand, determine how much fuel is left if you have propane- or a heating oil-powered heating system. Book a delivery if necessary. Monitor your fuel levels to keep this problem from happening again. You should also be mindful of your fuel usage on a regular basis. You can also install monitoring devices to keep track of your fuel levels for you. The heating oil company can also handle the fuel level monitoring for you, so you receive timely refills.

When you are certain you have plenty of fuel, the ignition system may be causing the problem. The ignition system is responsible for starting the fuel combustion. Your furnace cannot generate sufficient heat if it doesn’t work properly. If you have an older model, ensure it has a lit pilot light. Otherwise, follow the manual’s instructions on how to relight the pilot light. If you have a newer model, check the ignition switch located in the electronic ignition system. Carefully wipe away any dirt on the metal strip before retesting the ignition.

Get Started - Call Point Bay Fuel Today Explore Our Case Studies

 

Conclusion

Having a furnace that turns on but doesn’t generate heat can be confusing. Learning the best troubleshooting steps to take can help you the next time you face this problem. If the tips mentioned in this article do not work, consult a professional HVAC technician. These licensed professionals are equipped with the tools, skills, and training to handle complex issues your furnace may have. They can provide accurate and quick diagnoses and apply the best solution to your furnace problems.

Call Point Bay Fuel For All Of Your HVAC Requirements

Point Bay Fuel offers superior heating and cooling services in Ocean and Monmouth County, New Jersey.

Our certified technicians can provide you with excellent HVAC services, including heating and cooling tune-ups, repairs, installations, and replacements. Each technician has outstanding knowledge and experience to serve your HVAC system needs correctly the first time around.

Point Bay Fuel guarantees to provide the most competitive heating and cooling service costs in the area. Our maintenance services ensure to improve your comfort, increase your system’s energy efficiency, and reduce your home’s heating and cooling costs.

Need your system repaired or replaced? We’ll recommend the best solution that works well within your budget. The best part is, all our work is backed with a guarantee to ensure your satisfaction.

If you wish to schedule a service appointment, give us a call today!

Call Now: (732) 349-5059 Read Our Testimonials

Contact us now by calling (732) 349-5059 to speak to one of our home comfort specialists!

The post My Furnace Turns On But No Heat – Why? appeared first on Point Bay Fuel.